We LOVE Jeeps and wanted to make it easy for other Jeep enthusiasts to find great products for their Jeep.
First, if you want to select and install a CB radio in your Jeep, we know that it can be a difficult task. If you want to avoid hours of research, trying to figure out which components are best and are compatible, this Jeep Enthusiast Page is sure to help. We have taken all the hard work out of it for you. You just have to make sure to choose the correct antenna mount for your Jeep model and year.
Below, we have outlined different options for your CB radio, antenna, and mount. In addition to that information, please keep the following in mind:
- Be sure to choose the correct antenna mount for your Jeep model and year
- Not all of the antenna mounts include the coax cable and stud
- We highly recommend a spring for your antenna, but it is optional
- If you select a radio that does not have a built-in SWR meter, you should consider getting an external SWR meter to TUNE YOUR ANTENNA.
- Orders within the continental US that are over $75 qualify for free shipping!
Jeep CB Radio
Jeeps and other off road vehicles tend to have less space for mounting a CB radio. Because of this, we typically recommend a small radio for a Jeep. The smaller radios we offer in this package put out the maximum allowed 4 watts just like the bigger radios. If you do find a little more room for a CB in your Jeep, we recommend the BC880.
|Cobra 75 WX ST
|| President Andy
Jeep CB Antenna
As with all CB radio antennas, the antenna for your Jeep should be as tall as you can accommodate on your vehicle without becoming dangerous or impractical. A taller CB antenna will mean increased range and better reception. With less stable mounts, such as the fender mounts, you will want to stick with a 3 or 4 foot antenna.
|Firestik FS II
||PCA3004 - Jeep Wrangler Spare Tire Pre-Tuned Antenna Kit
Jeep Antenna Mount
We have We have several options for mounting your Jeep CB antenna. Some antenna mounts will only work with certain Jeep styles and model years. Be sure to double check the CB antenna mount that you choose with your Jeep to ensure compatibility. Also, take note that some of these mounts come as a kit (with the coax and stud included) and some do not.
|3 Way CB Antenna Mount Kit
||AUC10K ll Hood Mount with Coax Cable
|AUC11K Short Hood Mount Kit for CB Antenna
||AUJ2K - Jeep Spare Tire Antenna Mount Kit
|AUJ3K - Jeep Wrangler Tail Light Antenna Mount Kit
||MKJ4R Hood Channel Jeep Antenna Mount Kit
|MKM2 Molded Side Mount CB Antenna Kit
||1912091 - Teraflex Driver's Side Tail Light Antenna Mount For Jeeps|
|4997190 - Teraflex Tire Rack Antenna Mount For JK Jeep Wranglers
||BM1 - Hustler Wrap Around Bumper Antenna Mount
|1912092 - Teraflex Passenger Side Rear Tail Light Antenna Mount for Jeeps
Information on Specific Mounts:
*Note: Please check the picture of the mount and see if it looks correct for your model. Some information
passed on by customers and not yet verified. Thank you.
|Model||Year||Part #||Location||Coax Type||Side of Vehicle|
|Jeep||1998-2006||AUJ3K||Tail Light||Terminal/Hoop Connector||Driver or Passenger Side|
|Jeep||1997-2006||MKJ4R||Fender/Hood||Comes with Coax||Driver or Passenger Side|
|Jeep Cherokee||2018||AUGM3-L||Fender/Hood||Terminal/Hoop Connector||Driver Side|
|Jeep Cherokee (Not confirmed)||1995||AUC10, AUC10K||Tall Universal Fender/Hood||Terminal/Hoop Connector||Driver or Passenger Side|
|Jeep Liberty||2007+||AUJ2K||Back/SpareTire||Terminal/Hoop Connector||N/A|
|Jeep Old CJ Models||2007+||AUJ1, KJ1||Fender/Hood||Terminal/Hoop Connector||Driver or Passenger Side|
|Jeep Rubicon||2007+||AUJ2K||Back/SpareTire||Terminal/Hoop Connector||N/A|
|Jeep Wrangler||2007+||AUJ1||Fender/Hood||Terminal/Hoop Connector||Driver or Passenger Side|
|Jeep Wrangler||2007+||AUJ2K||Back/SpareTire||Terminal/Hoop Connector||N/A|
|Jeep Wrangler||2007+||PCA3004||Back/SpareTire||Full Kit||N/A|
|Jeep JL Wrangler / Unlimited||Not Specified||4997192||Tailgate||No Stud||Driver|
|Jeep JK||Not Specified||4838210||Back/SpareTire||No Stud||N/A|
Jeep Coax Cable
If you selected an antenna mount without coax, you will need to get get some! You can select between the PL259 to PL259 coax (PP8X18) or the PL259 to Lug (Hoop) Connectors (PL8X18). We recommend 18 feet of coax because many antenna manufacturers use 18 feet of coax to somewhat pre-tune the antennas. By getting the 18 feet of coax, you will likely have less antenna tuning needed.
If you end up with excess coax, be sure to properly store it. The number one reason that people contact us with high SWR can simply be solved by properly storing the excess coax- store any excess coax in a figure 8, about a foot in length, and loosely bound in the center so it will look like a long skinny 8. Avoid wrapping it in a coil or ball, winding it back and forth inside or outside the vehicle, or just shoving it under your floor mat.
This detailed guide from CB World "tuning your CB Antenna" can save you a lot of time when dialing in your SWR- don't forget to do this! It is the most important step in antenna installation to optimize the performance of your antenna and reduce the chances of damaging your awesome CB radio!
Cool Accessories for Your Jeep!
We understand- you LOVE your Jeep! We are Jeep lovers too which is why we want you to be able to get all the great accessories to fit your Jeep perfectly.