These cable assemblies are made from our RG-58A/U, Fire-Flex coaxial cable.  They are to be used on any single antenna installation.  This includes CB, scanner, 2-meter, and 10 meter.  

Features 

• Stranded center conductor to maximize flexibility and prevent untimely breakage
• Shielding coverage that averages 95% to protect against RF leaks and interference 
• Polyvinyl center insulation for ruggedness and longevity
• Performance that exceeds mil-spec requirements for 50 ohm RG-58A/U coax

The PL-259 has all soldered connections and a molded, weather-tight stress relief.  This is the common connector required to match the connection on the back of the transceiver.  The mount end termination is FireStik's exclusive Fire-Ring, and the other end is bare for those of you who wish to put it through the firewall.  The PL259 connector and hardware is included and does require soldering.  All of the coax connections are soldered and protected from the elements.  This termination is designed to fit any 1/2" (13mm) hole.  It also has a built in nylon shoulder washer to keep it centered and short free. 

If you are looking for this coaxial cable and do not want to solder your own end, then go to MU8R18, which has PL259 on one end and ring connector on the other.